Risultati da 1 a 1 di 1

Discussione: How To - Procedura di reflash box in emergenza !

  1. #1
    AMMINISTRATORE L'avatar di arci
    Data Registrazione
    Oct 2009
    Messaggi
    6,683
    Thanks
    2,573
    Thanked 6,995 Times in 2,772 Posts

    Predefinito How To - Procedura di reflash box in emergenza !

    How To Reflash the box without acess to MENU -> EMERGENCY FLASH


    This procedure should be used ONLY in case that it was not possible to access the Menu.


    1) Download a new firmware from the Azbox web site. (Format of software should be patch.bin)
    2) Copy the firmware file to your USB memory stick.
    3) Insert the USB memory stick into the USB port of the digital receiver.
    4) Power OFF and POWER ON the reciever with the USB Memory INSIDE.
    5) Wait for instructions on VFD or in screen. If you cannot see anything on TV screen use RCA or scart (not HDMI)
    6) If every thing is ok The receiver will install new Software and you can recovery back the control of your receiver.


    AND IF YOU CANNOT GO TO TO BOOT MENU (STEP 5), or if your box STAY all time on booting phase, reboot it and when saw Checking ... on VFD press several times the button OK until go to BOOT MENU.


    BE CAREFULL NEVER DO THIS OPERATION WITH A NTFS HDD PLUGGED!


    !!!! NEVER POWER OFF OR REBOOT DURING THE UPDATE PROCESS!!!!


    IMPORTANT NOTE
    Your USB memory must be formatted in the FAT file system. Otherwise, the digital receiver cannot recognize your USB memory. In addition, the digital receiver can only recognize files and directories which are named with only alphabetic, numeric and underscore letters. If there is a file or folder named with other letters, the digital receiver cannot recognize not only it but also its subsequent files and folders.
    ************************************************** ******************

    Guida ufficiale OpenSat (versione docx) ... How To Reflash the box without acess to MENU.zip

    Saluti
    Now On Test: AMIKO A3 (des ota 2.0.72) - AMIKO Alien 2+ (Spark 1.2.76 beta + HDMU 13941 + Neutrino MP by FFTEAM) - Jepssen Mediabox HD LX-1 (OpenPli) - AZBox Ultra HD (HDMU 14230) - AZBox Premium HD (Celrun 0.9.5311) with HDD 2,5 WD BLUE WDBABC5000ANC-ERSN SATA3 500 GB - Net shared with All receivers
    Only few Others : DMM 7020S - DMM 500S - DSR 9005/02 - BSKYB-DRX892i (MySky HD) - DS820ns HD (SkyHD) - DSX 6071 - MM9902 - MM9500

  2. The Following 5 Users Say Thank You to arci For This Useful Post:

    banditus (12-03-11), damo (11-03-11), micheles (12-03-11), newgolfer (12-03-11)

Permessi di Scrittura

  • Tu non puoi inviare nuove discussioni
  • Tu non puoi inviare risposte
  • Tu non puoi inviare allegati
  • Tu non puoi modificare i tuoi messaggi
  •  
DVBMEDIA.IT
L'universo multimediale intorno a te !!! News , recensioni , guide e supporto tecnico per i ricevitori linux based , e non solo ......
social network